New Insulation - Make sure you have the required attic vapor barrier to prevent moisture

Nightmare calls from house and flat owners, who had just installed insulation and realize that they have serious problems with moisture condenses into their attics is a normal occurrence during the winter months. It seems that there are just blowing insulation contractor in isolation, without regard to moisture migration. Many seem to think it is not their problem. Homeowners try to increase the efficiency of their homes by installing more insulation in their attics. Contractors are happy to sell their isolation. The problem starts in the cold days of winter, when the house is closed up and heat is running.

Moisture migrates through the walls and ceilings of the house and right through this new insulation! The moisture condenses on the back of the roof and it rains on this new insulation. Mold and mildew to follow if the problem is not solved in a short time.

Make The Straight Story and the right job so that you will be festering in the attic has not another sad homeowners who mold, moisture, frost and rot.


A good opportunity to assure proper air sealing your attic is to be decided at the time to replace the insulation. Too often, new insulation is layered over the old material. While this is acceptable in some cases it can lead to big problems. If it bypasses that allow air to enter air conditioned room in the attic, is a superposition cause a greater imbalance in pressure, which can lead to major problems with moisture in the attic. The best approach is always to remove the existing insulation and air seal and install new insulation.

The real dangers of this situation are the ruin your insulation and the presence of mold in your attic. To ignore these facts and go ahead with an overlay of attic insulation is risking to major health risks and costly repairs.

Once the form has spread, everything should come out, but only through the use of a qualified mold remediation company. Mold must be contained and prevented removal of the roof should not be done, to be used in the form of solving problems.

There is a lot of information on the Internet, to help you in fixing this problem.The same causes, etc. to increased interior attic moisture, frost on nails, also causes ice dams on the roof of the house.

Ice dams can cause major leaks in the winter and spring. The ice is caused by uneven melting of snow and ice blocks formed on the eaves of the roof. Ice Dam Prevention is not so difficult to achieve.

Thank you for coming in Energy Efficiency Reviews and read the article about: New Insulation - Make sure you have the required attic vapor barrier to prevent moisture, help us to Shared this article. hopefully useful to us all.

Related Post