Solar
energy technology is either active or passive solar solar system,
depending on the manner with which they capture, edit and share
categorized from solar energy. Active solar systems use photovoltaic (PV) panels and solar thermal collectors to capture the energy. On
the other hand, passive solar heating system includes positioning a
building to the Sun, so that windows, floors and walls are to gather,
collect and distribute solar energy in the cold season and eliminate it
during the warm seasons.
In general, solar collector systems are an active system, as opposed to passive involves use of mechanical devices such as PV modules to take advantage of solar energy. Before the installation, there are a few things you need to consider. This includes setting requires decisions about the category of solar panels on your home, that depends entirely on your needs and the system configuration and the energy production.
The installation is as is usually done on a roof that faces south, which is a perfect location for solar panel installations, but an east - west arranged roof can still produce enough power to make it valuable for solar power generation.
Although this can be a do it yourself project, it is usually recommended to place with an expert installation for you, because the process requires a lot of expertise, where solar panels for optimum performance to place. The installation process usually takes between two to three days. These are the steps for the installation of solar panels needed:
1 The solar expert completes a home assessment. The solar expert decides on the correct position and configuration of the plates so that they soaking in a position as much sunlight as possible.
2 Solar panels mounts are configured on top of your roof beams and holes are drilled for each bracket. Then the brackets are connected to the roof with rivets.
3 Thin sheet metal pieces (sheet metal products) are fixed on top of the supports. They are an important part of the plant that it. Aids in sealing water The roof can be layers of hot asphalt tiles and paper that can be used to help seal water more vulnerable areas of the roof. Metal rods are then riveted the post.
4 The plates are connected to the bars and linked in an array.
5 Finally, the solar panels are connected to the inverters. At this point you begin to produce solar power in your home.
